ChorusEcho

$11.00

Requires : ableton live9, max for live

I will send you the download link within 24 hours after payment. If you don't receive it, please send me a message. Please check your spam folder before sending me a message.
Category:

hyChorusEcho_cover

model of this effect is Chorus-Delay by t.c.electronic.

you can make spacy sound by using feedback

Signal Path
hyChorusEcho_signalPath
You can control feedback signal by bandpass filter.

Demo Track

Hicut Filter
hyChorusEcho_hycut
Hicut filter is located before chorus input.

Chorus
hyChorusEcho_chorus
In this section, you can control chorus effect.

Feedback:
Feedback signal pass through bandpass filter.
So filter gain = feedback gain.

Parameters:
“NEG” = controlling polarity of feedback signal(turning on this polarity of feedback become negative)
Freq = center frequency of bandpass filter
Q = q factor of bandpass filter
LFO Phase = making phase offset between left and right lfo
Modulation Speed = lfo rate
Modulation Depth = lfo depth
Modulation Waveform = lfo waveform(sine, triangle)
Delay Time =

XY Pad
You can control mod speed and mode depth


Echo
hyChorusEcho_echo
In this section, you can control echo effect.
Same as the chorus part, bandpass filter handles feedback signal.

Parameters:
Delay Time = interval of echo
Tempo Sync = turn on this switch, delay time is synced  to bpm
Delay Time L-R Offset = making time offset between L and R echo unit
Cross FB = cross feedback on/off switch


Routing
hyChorusEcho_routing
switching insert mode / send return mode
switching to send return mode, dry signal become completely mute
so if you need to hear wet signal only, you can use this swtich


Level and Mix
hyChorusEcho_levelMix

Parameters:
Input = input level
Output= output level
Chorus Mix = mix rate of chours out signal
Echo Mix = mix rate of echo out signal


Snapshots
hyChorusEcho_snapShots
You can make 8 snapshots.

Morph
hyChorusEcho_morph
You can morph two snapshots.

PhaserEcho = phaser > echo
CombEcho = comb filter > echo
RvrbChorusEcho = reverb > chorus > echo

Demo Track


PhaserEcho

PhaserEcho_cover


SignalPath
PhaserEcho_signalPath


Hicut Filter
hyChorusEcho_hycut
Hicut filter is located before chorus input.


Phaser Section
PhaserEcho_phasorSection

Bandpass filter is placed in the feedback path.
You can control pass through feedback signal by this.

NEG” = inverting feedback signal

XY Pad = you can control phasor parameter by this.

LFO Phase  = phase offset of LFO between left and right


Echo Section
hyChorusEcho_echo
In this section, you can control echo effect.
Same as the chorus part, bandpass filter handles feedback signal.

Parameters:
Delay Time = interval of echo
Tempo Sync = turn on this switch, delay time is synced  to bpm
Delay Time L-R Offset = making time offset between L and R echo unit
Cross FB = cross feedback on/off switch


CombEcho
CombEcho_cover

Signal Path
hyCombEcho_signalPath

Comb Filter Section
CombEcho_comb_params
delay time of comb filter can be modulated by LFO and Env Follower.

Echo Section

please refer to echo section of PhaseEcho


RvrbChorusEcho
hyRvrbChorusEcho_cover

Signal Path
hyRvrbCombEcho_signalPath

Reverb/Chorus Section
hyRvrbChorusEcho_rvrbchorus_params

Echo Section

please refer to echo section of PhaseEcho


Snapshots and Morph
CombEcho_snapshots_and_morph

You can make 8 snapshots of the effect state.
And you can morph 2 snapshots.