Sample Studio

$16.00

Requires : ableton live9, max for live

I will send you the download link within 24 hours after payment. If you don't receive it, please send me a message. Please check your spam folder before sending me a message.
Category:

samplestudio4_cover
version 4 of SampleStudio
free update for SampleStudio user

oneshot sampler x8


Signal Path
hysamplestudio4_signalpath
You can trig loaded samples by several ways(trig button, gridseq, midi input).


Sample Loading
samplestudio4_sampleloading
drag and drop your sample files to number fields 1 to 8


Sample Slot
samplestudio4_sampleslot
Line1/2 = these parameters will affect to playback speed
Spd = playback speed
Prob = trigger probability
Vol = output volume
Pan
Cutoff = filter cutoff
FX = fx send amount
Thru LP BP HP” = filter type
Preview” = sample preview button
Reverse” = sample reverse button


Window Mode
samplestudio4_windowmode
You can change window mode here.

Slider Window
samplestudio4_sliderwindow
When slider mode is active,this window will be show up.
You can control all slot parameters by these sliders.

R/C = slider randomize/clear button
Radomize Range = you can set radomize range(0 to 100%)

Grid Window
samplestudio4_gridwindow
When grid mode is active, this window will be show up.
You can trigger slot sample by this grid sequencer.

> < >< R” = sequencer running directions
/4 /2 x1 x2 x4” = sequencer running speed
4 8 12 16 20 24 28 32” = sequencer step size


Triggering Slot Samples
samplestudio4_triggeringsamples
There are several ways to trigger slot samples.

1, Trig Button = clicking “Trig” button, slot samples will be triggered
2, Grid Seq = you can trigger slot samples by grid sequencer
3, Midi Trig = you can trig slot sample by midi note input

Midi Input Setting
hysamplestudio4_midisetting
Clicking “Midi” button, midi setting window will show up.
You can map midi note to sample slots.

In this case note C will trigger sample slot1 and 6.
Note C# will trigger sample slot3.
Note D will trigger all sample slots.


Effect
samplestudio4_effects
There are 4 effects available.

Lofi:
Crush
= bit crush 
DS = down sampling
Mix = mix balance

Comb:
Delay = delay time
FB = feedback level
Tone

Delay:
Time = delay time
Sync = turn on this, delay time will sync to host bpm
FB = feedback level
Mix = mix level

Reverb:
Size = room size
Decay = decay time
Mix = mix level


Output
samplestudio4_output
Width = stereo width(0 to 200%)
Gain = gain level
Vol = output volume
Phase inv = turn on this, signal phase will be inverted


Save/Load
samplestudio4_saveload
You can save/load parameter settings here.

 

hySampleStudioLayer3_cover2

version 3 of Sample Studio Layer

V2>V3:
new sample engine
grid trigger mode
changed effect path
added lfo for controlling effect params
improved cpu usage


Signal Path
hySampleStudioLayer3_signalPath2


Demo Track


Sample Import
hySampleStudioLayer3_sampleImport

drag and drop your sample files to number field 1 to 8.


Sample Slot
hySampleStudioLayer3_sampleSlot
Parameters:
hySampleStudioLayer3_line_curve
Example:
hySampleStudioLayer3_plybkNormal
If you set line and curve values like above,
sample will be playbacked normally.

hySampleStudioLayer3_plybkReverse
If you set line and curve values like above,
sample will be playbacked reversely.

CF = filter cutoff frequency
Spd = sample playback speed
Pan
Vol = voluyme
–, LP, BP, HP” = filter type, “–” is bypass
Prev” = sample preview button
R C” = randomize/clear sample slot parameters


Slider Window
hySampleStudioLayer3_sliderWndw

You can also control slot parameters here.

Timing = triggering timing shift
Probability = triggering probability(0 to 100%)
FX = dry/wet balance of sample slot output

R C” = randomize/clear slider value


Sample Triggering

There are 3 ways to trigger loaded samples.(trigger button, grid seq, midi input)

Trigger Button
hySampleStudioLayer3_trigButton

by clicking “TRIG” button, you can trigger all loaded samples.

Grid Sequencer
hySampleStudioLayer3_gridSeq

hySampleStudioLayer3_sliderGridTab
Clicking “Grid” tab, grid seq window will be appeared.
You can trigger loaded samples by grid sequencer.

On/Off = sequencer on/off
> < >< R” = seq running directions
Speed = seq speed
Size = seq step size

Midi Trigger

You can trigger loaded samples by midi note input.

hySampleStudioLayer3_midiButton
Clicking “MIDI” button midi input setting window will be pop-up.

hySampleStudioLayer3_midiInputSettingWndw
In this case, note C triggers all samples.
note C# triggers sample of slot2,
note D triggers sample of slot3,
and so on…


Effect
hySampleStudioLayer3_fx_panel

Filter:
LP BP HP” = filter type
CF = cutoff freq
Reso = resonance
LFO =
amount of lfo to cf(0 to 100%)

Comb:
Delay =  delay time
FB = feedback
LFO =
amount of lfo to delay time(0 to 100%)

Tremolo:
Waveform = modulation waveform
Rate = modulation speed
Depth = modulation  depth

Delay:
Time =  delay time
FB = feedback
Mix = dry/wet balance
LFO =
amount of lfo to delay time(0 to 100%)

Reverb:
Size = Room Size
Dec = decay time
Damp = hi damp
Mix = dry/wet balance

Output:

Wid = stereo width
Gain
Vol

LFO
hySampleStudioLayer3_fx_lfo

MenuBox = lfo waveform
“Sync” = lfo speed sync switch
Rate = lfo speed

Sample Studio2 Layer
SampleStudio2Layer_cover
version 2 of Sample Studio2 Layer
You can load 8 audio samples and make layer sound using them.

Signal Path
SampleStudio2Layer_signalPath

Sample Loading
SampleStudio2Layer_sampleLoading
Drag and drop your audio files to 1 to 8 fields.

Sample Slot
SampleStudio2Layer_sampleSlot
Envelope Generator
envelope controls sample playback speed.
L1, L2, C1, C2 are parameters for envelop generator.

SampleStudio2Layer_envLine12
L1 = controlling line1
L2 = controlling line2
C1 = curve of line1
C2 = curve of line2

“Prev” button = preview sample sound
“R C” = randomize/clear envelope parameters
“– LP BP HP” = filter type(bypass, lowpass, bandpass, highpass)
Spd = playback rate
Pan
Vol

Sliders
SampleStudio2Layer_mslider
You can control most parameter values from this section.

Timing
SampleStudio2Layer_trigTiming
You can control trigger timing by this sliders.
Menu Box = base time for trigger timing
Actual Trigger Timing = base time * slider value(0 to 100%)
“R C” = randomize/clear slider values
Grey Bar = set randomize range

Example
In this case, slider value of slot1(blue slider) is 0.
So sample slot1 is immediately triggered when trigger signal is coming.
And slider value of slot2(light blue slider) is about 50 and base time is 16n.
So sample slot2 is triggered after 16n * 0.5 when trigger signal is coming.

Delay Send Amount
SampleStudio2Layer_delaySendSliders
You can set delay send amount of each sample slot here.

FX and Output
SampleStudio2Layer_FXandOutput
Lofi
Bit  = bit reduction
Fold = folding back audio signals

Drive
Gain = pre gain
Vol = volume

Shift
Shift = pitcj shift
Mix = dry/wet mix

Delay
Time = delay time
FB = feedback
Pan
Vol

Reverb
Size = room size
Dec = decay time
Damp = hi damp
Vol

Trigger and Midi Input
SampleStudio2Layer_TrigandMidiInput
Trigger Button = sending trigger signal to all sample slots

Midi Input
SampleStudio2Layer_MidiSetting
Clicking “Midi” button, this window will show up.
You can trigger sample slots by midi notes.
In this case, note “C” trigger all sample slots.
Note “D” triggers slot 5, 6, 7, 8.
Note “E” triggers slot 1, 3, 5, 7
and so on…

Sample Studio Grid
SampleStudioCover

Loading Samples
First you need to load some samples.

SampleStudioSampleLoad

Simply drag and drop to “Sample” field.

This patch is suppose to be used for handling one shot samples.
But you can load loop samples if you want.

Sample Windows
SampleStudioSampleWindows

In this section, you can edit each sample.

Sample Edit
SampleStudioSampleEditWindows

From the top:
Waveform Display =
Envelope Display =

SampleStudioFuncWindowjpg

L1 = control line1
L2 = control line2
C1 = curve of line1
C2 = curve of line2

Inv Switch = inversion switch for line function
Rnd/Rst Switch = randomize L1, L2, C1, C2 values / reset all values of sample edit section
Prev Button = preview sample
NumberBox = playback speed of loaded sample (0% to 200%)
LP BP HP = filter type
CF Knob = cutoff frequency
WS Knob = gain of waveshaper
Pan Knob = panning
Vol Knob = volume

Envelope

Envelope controls palyback direction and playback speed.

Envelope Example 1
SampleStudioEnvelopeExample1


Normal Playback

Envelope Example 2
SampleStudioEnvelopeExample2


Reverse Playback

Envelope Example 3
SampleStudioEnvelopeExample3


Half Reverse Half Normal Playback

Envelope Example 4
SampleStudioEnvelopeExample4


Using Curve

Envelope Example 5
SampleStudioEnvelopeExample5




Grid Track
SampleStudioGrid1

From the left:
Sample Number
Grid = controlling trigger on/off
R = randomize grid status
c = clear grid status
ON/OFF = grid seq on/off
> < >< R = direction of grid seq
Menu Box = sequencer speed

Global Seq Control
SampleStudioGlobalSeqControljpg

In this section, you can control all seq settings at once.
And you can also change snapshots of grid seq patterns.

FX Grid
SampleStudioGrid2

In this section, you can control effect on/off of each step.
You can make 8 snapshots of grid pattern.

FX
SampleStudioGridModeFX

You can set parameters of each effect.

Lofi
Bit = bit depth (1 to 24, default 24)
Lofi = dirt incoming signals(default 0)
Vol = volume of lofi effect

Dist
Thrsh = threshold, incoming signal over this value will be distorted
Gain =
Vol = volume of distortion effect

Repeat
MenuBox = repeat rate
Rate = modulation speed of repeat rate
Amt = modulation depth
Gain

Tape
MenuBox = length of pitch dropping
Mode =
Crv = curve of pitch dropping
Smth = smoothness of pitch change

Delay
MenuBox = delay time
NumberBox = offset L/R(-33 to 33 %)
Fdbk = feedback
Pan
Vol

Reverb
Size = room size
Decay = decay time
Damp = high damp
Vol

Master
WS = waveshping
Vol = master volume

FX Chance Operatiom
SampleStudioGridModeCHOP

In this section, you can control trigger chance.
This function only affects to grid “On”.
In this case, grid on of lofi is 100% chance to be triggered.
So everytime grid on for lofi is triggered.
And chance of grid on for Dist is 0%.
So grid on for Dist will never be triggered in this situation.
Trigger chance for Repeat is 50 %.
So there is a 50 % chance to be tirggered.

Sample Studio Layer
SampleStudioLayerMode

Multi Sliders
SampleStudioLayerModePage1

SampleStudioLayerModePage2



You can control sample setting values from these sliders.

Trigger Timing
SampleStudioLayerModeTiming

You can control delay time of trigger timing from these sliders.
Lowermost slider for sample 1 amd topmost slider for sample 8
You can change maximum delay time of trigger timing by menubox next to “Timing” label.
In this case, maximum delay time is 4n( = 4th note ).

In this case, sample 1 is tirggered immediately after hitting “Trigger” button.
And slider value for sample 2 is about 50%.
So sample 2 will be triggered after 8th notes.
And slider value of sample 3 is 100%.
So sample 3 will be triggered after 4th notes after hitting “Trigger” button.

R = randomize all sliders value
C = clear all sliders value

FX
SampleStudioLayerModeFX

In this section, you can control effect parameter

Sample Studio Chance
SampleStudioChanceModeFX

In this mode, you can control sample trigger by chance operation.

Control Window
SampleStudioChanceModeControlWindow

There are 6 windows.
5 for sample triggering, 1 for effect control.
Speed = interval of trigger signals, in this case every 4th notes trigger signal will be generated.
Rnd = randomize all 9 sliders
Rst = reset all 9 sliders
There are 9 sliders.
1 to 8 = for trigger chance of each sample
M = mute
In this case, only sample 1 has chance to be triggered.
And speed is 4n, so every 4th notes sample 1 is triggered.

Example1
SampleStudioChanceModeControlWindow2

In this case, sample 2 and mute have equal chance to be triggered.
And speed is 16n, so every 16th note sample 2 or mute will be triggered.

Example2
SampleStudioChanceModeControlWindow3

In this case, slider 4 has highest value, so sample 4 has highest chance to be triggered.
Slider 7 and mute slider have similar value, so sample 7 and mute is 2 nd highest chance to be triggered.
And slider 3 has small value, so sample 3 has little chance to be triggered.

FX Control Window
SampleStudioChanceModeControlWindow4

In this window, you can control chance of effect on/off.
No = no effect

FX
SampleStudioChanceModeFXValues

In this section, you can control effect values.