version 2 of SampleFader
There are 5 sample playback units.
Each unit playback loaded sample.
And envelope generator controls volume of each sample playback unit.
Loading same sample file to all sample slot.
Then set playback speed, direction differently.
You can get some interesting result.
Drag and drop your audio file to square filed.
Sample Playback Unit
“1Bar, 2Bar, 3Bar, 4Bar” = bar size of loaded sample
“/8, /4, /2, x1, x2, x4” = playback speed
Rev = reverse playback on/off
Sample Playback Units Control
You can control pan, volume, mute/solo state of each unit here.
Signal from envelope generator is used for cross fading output of sample players.
In this case, output of sample player 1 and 2 will be crossfading alternately.
In this case, you will hear output sample player 1 first, then it will be crossfaded to output of sample player2, then will be crossfaded to output of sample player3….
Editing Envelope Generator
Click and hold small circle, then you can change the position of it.
Holding down “option” key on the section you want to add curve.
Then move your mouse up/down, you can make curve.
Controlling Envelope Generator
Step Size = step size of generated envelope signal
Speed = generating speed
Snapshots = snapshots of edited envelope forms
Rnd/Reset = randomize/reset envelope editor
Lofi = lofi level
Mix = mix level
HP = one pole highpass
LP = one pole lowpass
Time = delay time
Sync = synced delay time on/off
FB = feedback
Level = output level
Gain = output gain
Vol = master volume
version 1.1 of SampleFader2
• now loaded sample name will be displayed
• fixed track volume control
• expanded envelope randomizer
Sample Name Display
File name of loaded sample will be displayed right bottom of the waveform display.
Now there are “1,2,3,4,5” buttons.
You can control randomize behavior with these buttons.
If all 1 to 5 buttons are active, all tracks will be included randomize behavior.
If only “1” and “2” buttons are active, result will be like this.
you can mix 4 audio samples
Image of Fade and Mixing Audio Samples
cross fading 4 audio samples
drag and drop sample files to 1 – 4 fields
“1Bar 2Bar 3Bar 4Bar” = bar size of loading sample
MenuBox = playback speed
“Reverse“= reverse playback
Fade Control Signal Setting
Shifting phase of fade control signal
you can set speed of fade signal.
interval of fade signal = 1/48, 1/32, 1/16, 1/12, 1/8, 1/6, 1/3, 1/2, 1, 2, 4, 6, 8, 16
Fade Curve = shape of fade signal(50% to 150%)
Mute and Solo
controlling mute/solo state of sample slots
Wid = stereo width
Vol = output volume
loading same audio file to all sample slots
set playback speed, playback direction, bar size, pan, vol differently
loading 4 different drum loop samples
ON/OFF = pitch shifter on/off
12 st(semitone) = 1 octave
100 cent = 1st
turning on EQ switch, EQ edit window will appear.
3Band EQ = lowshelf, bell, highshelf