version 2 of Sample Trigger
free update for Sample Trigger user
Signal Path
Demo Track
[soundcloud url=”https://api.soundcloud.com/playlists/171790085″ params=”color=00aabb&auto_play=false&hide_related=false&show_comments=true&show_user=true&show_reposts=false” width=”100%” height=”450″ iframe=”true” /]
Sample Import/Setting
Sample Import
Drag and drop your sample file to number filed 1 – 4.
Imported Sample Setting
Clicking setting tap, this window will appear.
You can set bar size and base volume of each sample file.
“1Bar 2Bar 3Bar 4Bar” = if you import 2bar sample, should choose 2bar
Volume = base volume of imported sample
GridSeq for Sample Select
This grid sequencer controls sample selector.
One of four sample will be passed through selector.
GridSeq Settings
On/Off Switch = gridseq on/off
“Normal/Polyrhythm” = clock mode(normal/polyrhythmic)
“> < ><1 ><2 R” = running directions of sequencer
Speed = sequencer speed
Start = sequencer start point
Size = step size of sequencer(max 32)
GridSeq Track for Controlling Sample Parameters
You can control sample parameters from this gridSeq.
Control Parameters
Start = sample start point of each step
Playbk = playback speed of each step
Pitch = pitch shift of each step
Pan = pan position of each step
Vol = volume of each step
Rev = reverse playback on/off state of each step
Mute = mute state of each step
Grid State Control
“R C” = randomize / clear grid state
Arrorw Buttons = shifting grid state(upper side:sample select track, lower side: sample parameter track)
GridSeq for Envelope Triggering
In this grid track, you can set triggered envelope state of each step.
Envelope Parameters
Attack = attack time
Cur1 = curve1
Cur2 = curve2
Effect Controlling Track
You can control effect parameter from this track.
Filter = controlling filter cutoff
Lofi = controlling lofi depth
Flanger = controlling drywet balance
Delay = controlling delay send amount
Slider Control
Template Pattern = template patterns for slider value
Set All = set all slider values at once
Range = randomize range(0 to 100%)
“R C” = randomize/clear slider values
Shift = shifting slider values
Effect Setting
Clicking “Setting” switch, effect setting window will appear.
Filter
“LP BP HP” = filter type
Reso = resonance
Env = envelope follower amount(-100 to 100 %)
Gain = filter gain
Lofi
Bit = bit depth
Dirt = makes sound dirt
LP = lowpass filter
Flanger
Delay = delaytime
FF = feedforward
FB = feedback
Rate = modulation speed
Depth = modulation depth
Offset = phase offset for modulation waveform
Delay
Time = delay time
Sync = delay time sync switch
FB = feedback
Cross = cross feedback switch
Pan
Vol
Save/Load
You can make 8 snapshots.
go to product page