version3 of Polyphonic Sequencer
free update for PolySeq user
32 step step sequencer x4
Signal Path
Sequencer Track
each sequencer has 4 parameter tracks(Note, Oct, Velo, Gate)
seq track 2 , 3, 4 has 2 mode(normal, slave)
Track Control
Sequencer Control
Power Switch = sequencer on/off
“N P” = normal / polyrhythmic mode
“> < >< R” = sequencer directions
MenuBox1 = sequencer speed
MenuBox2 = octave of each sequencer track
Start = start point
Size = step size
“S” = timing shift
Slider Value Control
“Note Oct Velo Gate” = change slider windows
Set All = set all slider values at once
“R C” = randomize/clear slider values
Range = randomize range(0 to 100%)
Arrow Buttons = shifting slider values
Slave Mode
seq track 2, 3, 4 have slave mode on/off switch.
If you turn on slave mode on,mid signal path become like this.
Global Control
mute/solo
You can control mute/solo state of seq track.
Root/Scale/Octave/Transpose
Root = root note
Scale = scale filter
Global Octave = -2 to +2 octave
Transpose = -24 to +24 semitone(you can control this param by midi note)
Set All Seq Param
set all 4 sequencer track parameter at once
Save/Load
Remote Control
You can send midi message to different midi track via receiver patch.
“PolySeqR” is the receiver, you need insert this before instrument.
“OFF, 1, 2, 3, 4” = receive channel, you need to set send/receive channel same number.
Send Channel
In this case send channel is 1,
so you can receive midi messages from seq track1 by setting receive channel 1.